This is the basic product - legs and main beams from profiles with a cross section of 100mm. The price depends on the size - length, width, height. Size - from 2 to 4m, in the case of a longer roof - you can add another module. Recommended height: 2.4m or 2.8m.

This is the basic version of the roof. The fabric is hung on the links, it can be rolled up by hand if we want to enjoy the open sky. The fabric protects from rain - it is hung at an angle and water drains into the gutter in the upper beam of the canopy, then flows down to the leg.

If you want to generate energy for your home - be sure to order photovoltaic panels. In the set you will get the wiring, a safety box and an on-grid inverter. You will be able to order a so-called hybrid inverter instead, that is, one to which you can connect an energy storage. The size of the installation depends on the size of the pergola. If you want to install a photovoltaic roof, then you have the choice of dimensional roofing options that fit in size to the panels.

The panels are installed on the aluminum structure at a small angle.

A trapezoidal sheet roof is installed under the panel, so that the canopy is resistant to rain and snow - water flows into the gutter in the upper beam of the roofing, and then - to the leg.

You can install a glass wall, so you will be protected from wind, rain and cold on colder evenings. The wall is not sliding, so it does not require expensive rail systems.

You can install a roll-up fabric blind in the wall - the so-called zip screen. It is used to protect against the wind (the zip lock holds the fabric very tightly in the guide) and provides privacy (you can choose fabric with different degrees of transparency, most often customers choose 5%). At the same time, the zip-screen provides access to fresh air, because through the fabric the wall breathes. You can install a zip screen in any walls, the price depends on the width - the distance between the legs. Zip screen is controlled via a mobile app - you receive a qr code, download the app and automatically pair your device to the driver.

You can assemble your canopy from any number of modules, adhering to the maximum dimensions - about this above. The additional module is cheaper than the first, as it contains fewer profiles. You can arrange canopies in a row or in Luther L.

We can make a canopy for you in standard colors (Anthracite 7016, Beige 7039, Alpine White 9010, Black 9005) or in any color for a surcharge.

You can choose the option of LED lighting, located in the upper beam of the canopy, so you will illuminate the center. You can install 1, 2, 3 or 4 strips, depending on how intensely and from which side you want to have light in the evenings. You can switch on and off and adjust the intensity of the lighting using the mobile application installed on your mobile device.

Additionally, you can illuminate the nearby area of the canopy. In each leg, you can install a led strip.